Introducing ... ENTHUSPEC

We are proud to announce the launch of Enthuspec! As the name suggests, we have designed Enthuspec parts to meet the specification of the enthusiast - manufactured in the U.S.A. under the highest, most rigorous standards achievable, Enthuspec parts have received a D.O.T. certified status and are sure to satisfy even those of the most discerning taste.

We are the exclusive distributor of Enthuspec products and currently offer:

Enthuspec Performance FRONT Stainless Steel Braided Brake Lines

• Made in the USA
• D.O.T. certified
• Includes all components necessary for installation
• Comes in a vibrant racing green color

OEM style rubber brake hoses are notorious under braking pressure to flex. This causes for an inconsistent and less reliable braking response.

Enthuspec performance stainless steel braided brake lines fixes this issue and will provide for a firmer and more consistent feel when braking. These lines are made in the USA at the highest standards to achieve, a D.O.T. certified status.

This part comes with all necessary hardware required for a complete installation on your car.

Enthuspec performance stainless steel braided brake lines fit on all 2010-2012 as well as 2013+ model Genesis Coupe in both Brembo and Non-Brembo configurations!

Enthuspec Performance REAR Stainless Steel Braided Brake Lines

• Made in the USA
• D.O.T. certified
• Includes all components necessary for installation
• Comes in a vibrant racing green color

OEM style rubber brake hoses are notorious under braking pressure to flex. This causes for an inconsistent and less reliable braking response.

Enthuspec performance stainless steel brake lines fixes this issue and will provide for a firmer and more consistent feel when braking. These lines are made in the USA at the highest standards to achieve, a D.O.T. certified status.

This part comes with all necessary hardware required for a complete installation on your car.

Enthuspec performance stainless steel braided brake lines fit on all 2010-2012 as well as 2013+ model Genesis Coupe in both Brembo and Non-Brembo configurations!

Enthuspec Performance FRONT + REAR (KIT) Stainless Steel Braided Brake Lines

• Made in the USA
• D.O.T. certified
• Includes all components necessary for installation
• Comes in a vibrant racing green color

OEM style rubber brake hoses are notorious under braking pressure to flex. This causes for an inconsistent and less reliable braking response.

Enthuspec performance stainless steel brake lines fixes this issue and will provide for a firmer and more consistent feel when braking. These lines are made in the USA at the highest standards to achieve, a D.O.T. certified status.

This part comes with all necessary hardware required for a complete installation on your car.

Enthuspec performance stainless steel braided brake lines fit on all 2010-2012 as well as 2013+ model Genesis Coupe in both Brembo and Non-Brembo configurations!

Enthuspec Performance Stainless Steel Braided Clutch Line

• Made in the USA
• D.O.T. certified
• Includes all components necessary for installation
• Comes in a vibrant racing green color

Upgrading the OEM line to a stainless steel braided version will noticeably improve clutch feel allowing for an improved response when shifting through gears.

Enthuspec performance stainless steel clutch lines are made in the USA to the highest standards. It will fit all manual transmission Genesis Coupe models. Approved for 2.0T and 3.8 V6 model years 2010-2012 as well as 2013+!

This part comes with all necessary hardware required for a complete installation on your car.

WE ARE CURRENTLY OFFERING FREE SHIPPING ON ALL ENTHUSPEC PRODUCTS!

- To the spec of the enthusiast, we present ENTHUSPEC

GenRacer takes 1st both races at the Glen 2013

This past weekend we were at Watkins Glen with NASA Northeast for their annual "Thunder at the Glen" round. We brought out the World Challenge Genesis Coupe and competed in the Performance Touring "B" Class. Its a class that fits World Challenge TC cars perfectly.

The Genesis performed "ok" during Saturdays race. We some suspension tuning and brake tuning, we got the car to do some decent lap times. The car felt decent around the road course in Watkins Glen, NY but definitely needed some tweaking to get the car to be more stable in braking and turn out. We were still able to come out on top and also post a lap fast enough to reset the track record in PTB.

That saturday night we did some spring changes and made the appropriate dampening settings to help get the rear more planted on turn out. We also made some damper settings to help with our braking. On Sunday we were on pole again for the start of the race. The race ended with us doing another fast lap to reset the track record and a victory in our class.

The next race will be at the end of October at NJMP - Thunderbolt with NASA Northeast for the final event of the season. We hope to have more changes on the car before then to get this car to handle and brake better. Until then.....

GenRacer PWC Car back to the dyno!

We had some boost spiking issues at our PWC event in Limerock
World Challenge is very strict on boost limits and this needed to be addressed before the next event. 

So we trailered the car up to Turbokits.com and met up with Sam at BTRcc to tune the car and get the boost stable. Very good results and the car feels amazing. We will be at Watkins Glenn, NY next week for a NASA race to do some testing. Incar video to come!

This image has been resized. Click this bar to view the full image.

Report this image

This image has been resized. Click this bar to view the full image.

Report this image

This image has been resized. Click this bar to view the full image.

*New Item* Megan Racing Manual Transmission Mount - Hyundai Genesis Coupe 10+

Megan Racing Manual Transmission Mount - Hyundai Genesis Coupe 10+ Through the years the soft rubber bushings deteriorate after constant flexing and vibration as well as being punished through weathering; this can cause them to tear and may seriously damage your engine and transmission. Megan Racing has developed a Hard-Rubber/Polyurethane motor mounts for Hyundai Genesis Coupe Manual Transmission Mounts. These reinforced mounts are perfect for the enthusiast who is looking to get the most from their vehicle as they will allow more energy to be transferred to the wheels instead of absorbing the energy into the soft rubber. Applications: Hyundai Genesis Coupe 2010+ Manual Transmission fits both 3.8L V6 and 2.0L Turbo models - Hardened Rubber utilized is rated at 70A on the durometer scale.

Can be purchased here at Genracer.com

Engine/Trans Removed - WC Build

Engine and trans to removed for some telemetry sensors to be installed, clutch, bushings, and other motor preventive items to be address. SCCA rules also state that we need to run 2 drive shaft safety loops and a ballistic shield on the bell housing. We will get to those necessary items at a later time. As for the motor build, we must run the factory turbo and manifolds. The motors will be stock except for Supertech Dual Valve springs that we are still awaiting from the manufacture.

Replay XD 1080 HD Video Camera available @ Genracer.com

Replay XD 1080 HD Video Camera available @ Genracer.com Replay XD1080 HD video camera is all about small and simple. Starting with the small design of the original Replay XD video camera and a clean sheet of paper, we managed to put full HD video into a small package. Featuring a water-resistant, hard anodized, rugged aluminum housing for your extreme adventures. The Replay XD1080 is the smallest and lightest full HD video action-camera on the market. Simple, ON/OFF and Start/Stop make the Replay XD1080 camera easy to operate. Simply turn it ON and Press Record to Start. The built-in LED & Vibration Feedback tells you that you’re ready to go. It’s really that simple.

ROTATE, TILT, SWIVEL, CLIP, MOUNT, ETC. Replay XD1080 can be mounted practically anywhere due to its small form-factor and all-round shape. There are two mounts included with each system to get you recording in no-time. HeimLock Mount (Swivel/Tilt): Features spherical adjustment with an eccentric cam-lock for a rock solid mount. Over 1,036,800 Mounting Positions with 360º lens rotation, 360º camera rotation, and 8º of tilt, not including the unlimited areas you can mount 1 of 4 included SnapTray VHB bases. Included are 2 Flat SnapTrays and 2 Curved SnapTrays with 3M® VHB adhesive to securely mount to smooth surfaces: metal, paint, powdercoat, LSE & HSE plastic. 3M® VHB adhesive ensures secure mounting and removal without harming your surface. LowBoy Mount (Fixed): Lowest profile mount, offers 360º lens rotation. Designed to be low and out-of-the-way. Compatible with our SnapTray VHB bases. HardCore (Billet): Optional billet-aluminum pro mounts are available for the most demanding action and motorsport applications. Tubular, Flat, Curved, Tripod, Universal, & Specialty mounts are available.

New Item: Supertech Dual Valve Spring Kit for 2.0T Hyundai Genesis Coupe

These just hit out selves! Extra insurance to those high revving motors with lots of boost. Help eliminate valve float. Supertech Dual Valve Spring Kit for 2.0T SPRK-HY1015-3 Valve Springs are made with premium Superclean Chrome Silicon Vanadium Steel alloy for higher performance & durability at high rpms and better memory Computer designed to ensure that wire stress levels do not overpass the limits of stress defined in the diagrams of fatigue for long durability under extreme conditions. Computer software also allows us to make sure that the harmonics are well under control. The Retainers are manufactured with high quality military certified Titanium alloy, CNC machined for a tight fit that will ensure a long durability.\ Dual Valve Spring 85@ 34.5mm (16)SPR-HY1015-3 + RET-TS1015/T1EX - SEAT-M1015-2 (also use OEM seal-seat)